Slot.it SIGA1629-PL Gear, 29T, Anglewinder, 16mm, Plastic

Slot.it anglewinder gear 29t Ø16mm - aluminum + plastic.  Fits 3/32" (2.37mm) diameter rear axle. Requires Ø6.5mm sidewinder type pinion or Ø6.0mm if the Flat-6 motor is used. 1 gear per package.

NOTE:  For Anglewinder Installation in the Slot.it Audi R8C, Scale Auto Radical SR9 and the Scale Auto Toyota GT1 the Flat 6 type motor must be used because of limited clearance under the body. For the Audi R8C use a 6.5mm OD Pinion with the 15mm OD Axle Gear (SIGA1524 / SIGA1525 / SIGA1526) along with a 1mm spacer behind the gear, or alternately use a 6.0mm OD Pinion with a 16mm OD Axle Gear (SIGA1627 / SIGA1628 / SIGA1629) with a 0.75mm spacer behind the gear.

$8.99

Add to Cart:
  • Model: SIGA1629-PL
  • Manufactured by: Slot.it

Ask a Question

Manufacturer Info


Your IP Address is: 3.236.55.137
Copyright © 2024 LEB Hobbies, LLC - Built by PRO-Webs.net