Slot.it

Slot.it standard long shaft pick-up guide.

Slot.it Universal screw pick-up guide with deep blade for wooden track. Depth; 8mm Length:24.3mm Thickness: 1.75mm

HRS set of screws, 2 short & 5 long w/nuts for HRS chassis.

Slot.it universal standard guide with screw mount for plastic track.

Black plastic pulley with 17 teeth for Four Wheel Drive System, 2 pieces.

Yellow plastic pulley with 18 teeth for Four Wheel Drive System, 2 pieces.

Slot.it 4WD 85 Teeth Cogged Belt marked with green stripe.

Slot.it 4WD 110 Teeth Cogged Belt which is marked entirely black.

Slot.it 4WD 111 Teeth Cogged Belt marked with red stripe.

Slot.it Single Flanged Bearing for Tensioner & selected motor mounts. This flanged bearing may be used to replace the standard plastic barrel...

The Slot.it HRS2 chassis is a fully configurable, universal plastic chassis for slot cars. Assembled and ready to run in inline configuration....

Slot.it Inline Reverse Motor Mount 0.5mm Offset. It is in principle exactly like the previous version (SICH70), which it now replaces. The only...

Slot.it Screw-in Guide for LMP Cars with 4WD System. This new screw type pickup is compatible with all types of braid - Two M2x3mm grub screws are...

Slot.it Screw mount pickup guide with pre-cut brass tabs for the LMP cars, for use on wooden track.  Pack includes: 2 brass terminals (SP04) 2...

Slot.it 4WD 108 Teeth Cogged Belt. Transmission belt for 4WD system with 108 teeth (e.g. Lola Slot.it equipped with chassis CS22-60b) CA22...

Slot.it Sidewinder Motor Mount 1mm Offset EVO6 with bearing seat (for CH105). This pack includes fins and screws to convert the motor mount into the...

Slot.it Sidewinder Motor Mount 1mm Offset EVO6 - bearing version. Replacement or SICH115.

Slot.it Anglewinder Motor Mount 0.0mm Offset EVO6 Hard with bearing seat for SICH105. (SICH105 sold separately)

Slot.it Anglewinder Motor Mount 0.5mm Offset EVO6 with bearing seat for SICH105. (SICH105 sold separately)

Slot.it Anglewinder Motor Mount 0.5mm Offset EVO6 Hard - bearing version. Replacement for SICH118.

Slot.it Anglewinder Motor Mount 1.0mm Offset EVO6 HARD - bearing version. Replacement for SICH119.

Slot.it Body to Chassis Fixing Screws 8mm long x10.

Slot.it M2 Hexagonal Nuts x10.

Slot.it Brass Washers for M2 Screws x20.

Slot.it SICH125 Metric screw 2.2x9mm, Brass, Large Head x10.

Slot.it SICH126 Metric screw 2.2x13mm, Brass, Large Head x10.

Slot.it Inline Reverse Motor Mount 0.0mm offset. Replaces CH13b - difference from replaced item: tab removed (compatible with classic DTM chassis).

Slot.it Brass Spherical Bushings x6.

Slot.it universal short shaft pick up guide.  Standard replacement for all brands that use the wire and eyelet combination to make contact with...

Body mounting plastic "cups" for use with HRS type chassis x4

Slot.it Clip-in racing guide featuring a short shaft and thin blade.  

The Slot.it HRS2 chassis is a fully configurable, universal plastic chassis for slot cars. Assembled and ready to run in sidewinder configuration....

Slot.it HRS2 Complete Chassis Anglewinder. Slot.it HRS2 complete and ready to run adjustable racing chassis to mount onto a wide range of slot car...

Slot.it HRS2 Chassis Starter Kit Sidewinder 0.5mm Offset. HRS Chassis The HRS chassis is a fully configurable, universal plastic chassis for slot...

Slot.it HRS2 Chassis Starter Kit Anglewinder 0.0mm Offset. HRS Chassis The HRS chassis is a fully configurable, universal plastic chassis for slot...

Slot.it HRS2 Chassis-to-Body connecting cups and spare parts.

Slot.it HRS2 Main Chassis Inline or Sidewinder applications.

Slot.it HRS2 Main Chassis Anglewinder.

Slot.it Motor Fixing Screws M2x4mm x10 (replaces SICH41). M2x4mm box stock motor fixing screws Button socket for hexagonal screwdriver, total thread...

Slot.it Motor Fixing Screws M2x4mm x10 (replaces SICH41B). M2x4mm box stock motor fixing screws Button socket for hexagonal screwdriver, total thread...

Slot.it HRS2 Chassis-to-Body connecting cups.

Slot.it Universal Spring Suspension Kit with Soft Springs for use with all Slot.it motor mounts. Components for standard CH47 spring suspension....

Slot.it universal spring suspension kit (rev1). Soft springs - for all type of motor mounts.

Slot.it Inline Long Motor Mount 0.0mm offset Boxer/Flat - Hard.  Compatible with DTM frames (side flap removed) of Slot.it. This Slot.it...

Slot.it HRS Chassis Offset 1mm lowered long lnline motor mounting pod for Boxer or Flat 6 motors.  Includes reinforcing metal brace and 2x M2...

 Slot.it Metric brass machine screws for body / motor pod attachment - 2.2 x 8mm small diameter screw head - 10/pk.

Slot.it Metric brass machine screws for body / motor pod attachment - 2.2 x 8mm large diameter screw head - 10/pk.  

Slot.it Metric brass machine screws for body / motor pod attachment - 2.2 x 5.3mm small diameter screw head - 10/pk.

Slot.it Metric brass machine screws for body / motor pod attachment - 2.2 x 5.3mm diameter large head, 10/pk.

Slot.it Metric brass machine screws for body / motor pod attachment - 2.2 x 5.3mm diameter, Countersunk head, 10/pk.