Scaleauto

RevoSlot RS-202WG Wide Rear Rubber Tires 20x11.5mm, new racing G25 x4.

Scaleauto SC-0005 Short Can High Performance Closed Can Motor 30,000rpm. High Performance closed can motor - 30,000 RPM, 280 gr-cm torque, 420...

Scaleauto SC-0007 Universal 1/32 Mabuchi style motor 35,000rpm. SCALEAUTO Universal 1/32 Mabuchi style motor - 35,000 RPM, 190 gr-cm torque, 440...

Scaleauto SC-0008B Short Can Tech-1 Motor 20,000rpm. Dual shaft allows application in any car with standard Mabuchi type motor both in inline as well...

Scaleauto SC-0009B S-Can Tech-2 Motor 25,000rpm. Tested at 12V Size: 25x20x15mm 0,21 Amp - 225 gr x cm Double shaft Plastic endbell 2mm axle Low...

Scaleauto SC-0010B Short Can Tech-3 1/32 Mabuchi style motor - 30,000rpm, 216 gr-cm torque. Dual shaft allows application in any car with standard...

Scaleauto SC-0011C Long-Can Tech-1 Motor 21,300rpm 285 gr-cm torque. 21,300rpm tested at 12V Size: 32 x 20 x 15.3mm 0,18 Amp - 285 gr x cm 2mm...

Scaleauto Long-Can Tech-2 Motor 25,000rpm. Tested at 12V Size: 32 x 20 x 15.3mm 0,26 Amp - 360 gr x cm Sealed endbell 2mm axle Low magnet...

Scaleauto SC-0013 High Performance TECH-3 Motor Series Motor 29,000rpm, 220 gr-cm torque, 300 milliamps max current. Applications:  Ninco NC-2 /...

Scaleauto SC-0014B Short-Can Tech-1 Motor - 20,000rpm, 205 gr-cm torque. Same size as JK Falcon, Little Ripper, Cheetah, Fox "S" Can Motors...

Scaleauto SC-0015B Short Can Tech 2 Motor 25,000rpm, 230 g-cm torque, 290 milliamps max current.  

Scaleauto SC-0016B Short-Can Tech-3 Motor 30,000rpm, 254 g-cm torque, 370 milliamps max current. 2mm plain motor shaft.

Scaleauto SC-0018B Slim-Can Tech-3 Motor 30,000rpm, 82 g-cm torque, 140 milliamps max current. Tested at 12V Size: 26.9 x 15.5 x 12mm 0,14 Amp...

Scaleauto Long-Can Sprinter-2 Motor 21,500rpm. Tested at 12V Size: 32 x 20 x 15.3mm 0,28 Amp - 300 gr x cm Sealed endbell 2mm axle High magnet effect...

Scaleauto Long-Can Sprinter Motor 21,500rpm for SCX RX41. A replacement upgrade motor for SCX cars and SRS2 cars replacing the original RX8, RX41 and...

Scaleauto Long-Can Endurance Motor 22,000rpm. Tested at 12V Size: 32 x 20 x 15.3mm 0,20 Amp - 310 gr x cm Sealed endbell 2mm axle Low magnet effect 4...

Scaleauto SC-0027B Long-Can Sprinter-Junior Motor 18,000rpm, 310 gr-cm torque.

Scaleauto Long-Can Sprinter-1 Motor 18,000rpm. Motor SC-28: 18000rpm Sprinter-1 12v - 0,22 Amp. 310 gr* cm 32.1x20.2x15.3mm Sealed endbell High...

Scaleauto SC-0029 Long Can Sprinter-Junior-2 Motor 22,500rpm. Tested at 12V Size: 32 x 20 x 15.3mm 0,29 Amp - 430 gr x cm Sealed endbell 2mm axle...

Scaleauto SC-0030 Long-Can Outlaw Motor 35,000rpm with Active Cooling. 35,000rpm Tested at 12V 0,41 Amp - 400 gr x cm MPM 14.5 gr 2mm axle Size: 32...

Scaleauto SC-1008 8T Nylon Pinion M50 for 2mm motor shaft (x4).

Scaleauto SC-1009 9T Nylon Pinion M50 for 2mm motor shaft (x4).

Scaleauto SC-1011 11T Nylon Pinion M50 for 2mm motor shaft (x4). 6.35mm for Sidewinder.

Scaleauto SC-1012 Nylon Pinion 12 tooth M50 for 2mm motor shaft (x4).

Scaleauto SC-1013 13T Nylon Pinion M50 for 2mm motor shaft (x4).

Scaleauto SC-1014 Nylon Pinion 14 tooth M50 for 2mm motor shaft (x4). For 2mm axle 14 teeth Ø8.25

Scaleauto SC-1091A55 Brass Pinion 8 Tooth for 2mm motor shaft, ø5,5mm (x2).

Scaleauto SC-1092A55 Brass Pinion 9 tooth For 2mm motor shaft, ø5,5mm (x2).

Scaleauto SC-1093A55 Brass Pinion 10 tooth for 2mm motor shaft, ø5,5mm (x2).

Scaleauto SC-1093A60 Brass Pinion 10 tooth for 2mm motor shaft, ø6,0mm (x2).

Scaleauto SC-1093A65 Brass Pinion 10 tooth for 2mm motor shaft, ø6,5mm (x2).

Scaleauto SC-1093E55 Ergal Pinion 10 tooth for 2mm motor shaft, ø5,5mm (x1).

Scaleauto SC-1093E60 Ergal Pinion 10 tooth for 2mm motor shaft, ø6,0mm (x1).

Scaleauto SC-1093E65 Ergal Pinion 10 tooth for 2mm motor shaft, ø6,5mm (x1).

Scaleauto SC-1094A55 Brass Pinion 11 tooth for 2mm motor shaft, ø5,5mm (x2).

Scaleauto SC-1094A65 Brass Pinion 11 tooth for 2mm motor shaft, ø6,5mm (x2).

Scaleauto SC-1094A67 Brass Pinion 11 tooth for 2mm motor shaft, ø6,75mm (x2).

Scaleauto SC-1094E60 Ergal Pinion 11 tooth for 2mm motor shaft, ø6,0mm (x1).

Scaleauto SC-1094E65 Ergal Pinion 11 tooth for 2mm motor shaft, ø6,5mm (x1).

Scaleauto SC-1095A65 Brass Pinion 12 tooth for 2mm motor shaft, ø6,5mm (x2).

Scaleauto SC-1095A67 Brass Pinion 12 tooth for 2mm motor shaft, ø6,75mm (x2).

Scaleauto SC-1095A70 Brass Pinion 12 tooth for 2mm motor shaft, ø7,0mm (x2).

Scaleauto SC-1095E70 Ergal Pinion 12 tooth for 2mm motor shaft, ø7,0mm (x1).

Scaleauto SC-1096A65 Brass Pinion 13 tooth for 2mm motor shaft, ø6,5mm (x2).

Scaleauto SC-1096A70 Brass Pinion 13 tooth for 2mm motor shaft, ø7,0mm (x2).

Scaleauto SC-1096E65 Ergal Pinion 13 tooth for 2mm motor shaft, ø6,5mm (x1).

Scaleauto SC-1097A70 Brass Pinion 14 tooth for 2mm motor shaft, ø7,0mm (x2).

Scaleauto SC-1097A75 Brass Pinion 14 tooth for 2mm motor shaft, ø7,5mm (x2).

Scaleauto SC-1097E70 Ergal Pinion 14 tooth for 2mm motor shaft, ø7,0mm (x1).

Scaleauto SC-1098A80 Ergal Pinion 15 tooth for 2mm motor shaft, ø8,0mm (x1).