Slot.it

Slot.it standard long shaft pick-up guide.

Slot.it Pickup guide with extended blade for use with routed tracks.

HRS set of screws, 2 short & 5 long w/nuts for HRS chassis.

Slot.it universal standard guide with screw mount for plastic track.

Black plastic pulley with 17 teeth for Four Wheel Drive System

Yellow plastic pulley with 18 teeth for Four Wheel Drive System

Z85 Toothed Belt for 4WD System

Z110 Toothed Belt for 4WD System

Z111 Toothed Belt for 4WD System

This flanged bearing may be used to replace the standard plastic barrel in Slot.it's Four Wheel Drive System, to further reduce friction between...

Slot.it M2.2 x 4.5mm Motor Mount Fixing Screws, partial thread, 8 screws and 8 washers.

Slot.it Inline Reverse Motor Mount 0.5mm Offset. It is in principle exactly like the previous version (SICH70), which it now replaces. The only...

Slot.it Screw-in Guide for LMP Cars with 4WD System This new screw type pickup is compatible with all types of braid - Two M2x3mm grub screws are...

Slot.it Screw mount pickup guide with pre-cut brass tabs for the LMP cars, for use on wooden track.  Pack includes: 2 brass terminals (SP04) 2...

Slot.it Sidewinder Motor Mount 1mm Offset EVO6 with bearing seat (for CH105). This pack includes fins and screws to convert the motor mount into the...

Slot.it Anglewinder Motor Mount 0.0mm Offset EVO6 Hard with bearing seat for SICH105. (SICH105 sold separately)

Slot.it Anglewinder Motor Mount 0.5mm Offset EVO6 with bearing seat for SICH105. (SICH105 sold separately)

Slot.it Anglewinder Motor Mount 1.0mm Offset EVO6 Hard with bearing seat for SICH105. (SICH105 sold separately)

Slot.it Inline Reverse Motor Mount 0.0mm offset. Replaces CH13b - difference from replaced item: tab removed (compatible with classic DTM chassis)

Slot.it universal short shaft pick up guide.  Standard replacement for all brands that use the wire and eyelet combination to make contact with...

1.0mm Offset (Hypoid) Reverse Motor Mount for Standard FA130 size Mabuchi Can Motors (Endbell Drive) - This can ONLY be used with OFFSET (Hypoid)...

Slot.it Clip-in racing guide featuring a short shaft and thin blade.  

Slot.it Screw Set - includes 12 self tapping screws - 8 short Phillips pan head and 4 long Phillips flat head.  Compatible with all Slot.it cars.

Slot.it HRS #2 Screw Kit - includes body mount screws, chassis screws and nuts, setscrews for ride height adjustment and washers.

Slot.it Motor Fixing Screws M2x4mm x10 (replaces SICH41). M2x4mm box stock motor fixing screws Button socket for hexagonal screwdriver, total thread...

Slot.it Inline Long Motor Mount 0.0mm offset Boxer/Flat - Hard.  Compatible with DTM frames (side flap removed) of Slot.it. This Slot.it...

Slot.it HRS Chassis Offset 1mm lowered long lnline motor mounting pod for Boxer or Flat 6 motors.  Includes reinforcing metal brace and 2x M2...

 Slot.it Metric brass machine screws for body / motor pod attachment - 2.2 x 8mm small diameter screw head - 10/pk.

Slot.it Metric brass machine screws for body / motor pod attachment - 2.2 x 8mm large diameter screw head - 10/pk.  

Slot.it Metric brass machine screws for body / motor pod attachment - 2.2 x 5.3mm small diameter screw head - 10/pk.

Slot.it Metric brass machine screws for body / motor pod attachment - 2.2 x 5.3mm diameter large head, 10/pk.

Slot.it Metric brass machine screws for body / motor pod attachment - 2.2 x 5.3mm diameter, Countersunk head, 10/pk.

Slot.it bronze spherical bushings go a step further to reduce friction and increase precision. Self-lubricating bushings will be used on all Slot.it...

Slot.it Suspension Kit Brass Screws Countersunk Head - 2 x 9mm Length & 2 x 13mm Length.  Set is meant for HRS Chassis, but can be used to...

Slot.it Anglewinder Motor Mount 0.5mm Offset EVO6 Hard. This Slot.it motor mount allows easy installation of the Boxer / Flat-6 motors....

EVO6 Anglewinder motor mount for Boxer / Flat-6 0.0mm Offset (replaces CH29)