Slot.it

Slot.it Starter Kit SIKK15B - 36t sidewinder spur gear, 17.3x8.25mm aluminum wheels, 54mm pro axle, bronze bearings, spacers and grub screws. This...

Slot.it anglewinder motor mount 1.0mm offset Scalextric PCR EVO6 conversion kit. This Slot.it motor mount allows easy installation of the Flat-6...

Slot.it Anglewinder Motor Mount PCR Conversion Kit 1.0mm Offset. Replaces SIKK16.

Slot.it Starter Kit for Carrera DTM - 26t inline crown, 17.3 x 8.2 x 1.5mm aluminum wheels, 54mm pro axle, bronze bearings and grub screws. 2...

Slot.it Boxer/2 Motor 21,500 rpm Open/Closed. The Slot.it Boxer/2 motor has two different case sides, open and close, merging the 'open' and...

Low Profile Boxer FLAT-6 Motor - 20,500 RPM, 200 gm-cm torque with no pinion - 7.3mm Front Shaft Length - Closed Can - Compatible with home racing...

LOW PROFILE Boxer FLAT-6 motor - 20,500 RPM, 200 gm-cm torque with no pinion - 10 grams magnetic traction - Compatible with home racing wall pack...

LOW PROFILE Boxer FLAT-6R motor - 7.3mm Front Shaft Length - 22,000 RPM, 220 gm-cm torque with no pinion - 22 grams magnetic traction - Compatible...

Slot.it has further improved the revolutionary concept of the Flat-6 motor.  Two new versions are now available of this compact and lightweight...

Slot.it has further improved the revolutionary concept of the Flat-6 motor.  Two new versions are now available of this compact and lightweight...

Slot.it S-Can Motor 21,000 rpm V12/4 - Classic DTM Slot.it models box stock.  Supplied without wires and pinion. Stall torque:  150 g*cm...

Slot.it small can motor 23,000 rpm V12/4, 170 g*cm @ 12v. Supplied without wires and pinion. This Slot.it V12/4 motor 23,000rpm (SIMX16) is assembled...

Slot.it V12/4 Motor 23.000 rpm with single-shaft. Stall torque: 170 g*cm Maximum speed: 23000 rpm Maximum power: 9.8 W @ 12 V Supplied without wires...

Slot.it S-Can motor, 29,000 rpm V12/4 (FC130) - 160 g*cm torque, supplied without wires and pinion.  Compatible with home racing wall pack power...

Slot.it Steel Pro Axle - turned ground, polished, 2.38mm (3/32) x 45mm, 2 pack. ProAxle axles are tempered, rectified steel and give you the...

Slot.it Steel Pro Axle - turned ground, polished, 2.38mm (3/32) x 48mm, 2 pack. ProAxle axles are tempered, rectified steel and give you the...

Slot.it Steel Pro Axle 48mm - polished, 2.38mm (3/32) rectified reduced center diameter for sidewinder, 2 pack. Smaller section near engine No more...

Slot.it Steel Pro Axle - turned ground, polished, 2.38mm (3/32) x 51mm, 2 pack. ProAxle axles are tempered, rectified steel and give you the...

Slot.it Steel Pro Hollow Axle 51mm - turned ground, polished, hollow, 2.38mm (3/32), 2 pack. Hollow shaft to reduce weight and inertia.

Slot.it Steel Pro Axle 51mm - polished, 2.38mm (3/32) rectified reduced center diameter for sidewinder (2x). Smaller section near engine No more dirt...

Slot.it Steel Pro Axle - turned ground, polished, 2.38mm (3/32) x 54mm, 2 pack. ProAxle axles are tempered, rectified steel and give you the...

Slot.it Steel Pro Hollow Axle 54mm - turned ground, polished, hollow, 2.38mm (3/32), 2 pack. Hollow shaft to reduce weight and inertia.

Slot.it Steel Pro Axle 54mm - polished, 2.38mm (3/32) rectified reduced center diameter for sidewinder (2x). Smaller section near engine No more dirt...

Slot.it SIPA01-58H Axle 3/32" x 58mm, Hollow x2.

Slot.it Bronze Bushings for 3/32 axles, set of 2 pcs.

Slot.it plastic wheel inserts BBS type - black, for Ø15.8mm wheels (4x). Modern GT/LMP.

Slot.it plastic wheel inserts BBS type - gold, for Ø15.8mm wheels (4x). Modern GT/LMP.

Slot.it plastic wheel inserts BBS type - silver, for Ø15.8mm wheels (4x). Modern GT/LMP.

Bronze bushings for Proslot plastic chassis cars, 3/32 Axles, 2 pack.  

Slot.it Brass Bushings for Carrera and 3/32 axles x2

Slot.it Wheel inserts Plastic F1 BBS Black for SIPA20 hubs x4.

Slot.it Wheel Inserts BBS Gold (for SIPA20 hubs) x4.

Slot.it Wheel Inserts BBS Silver (for SIPA20 hubs) x4.

CNC Machined aluminum collar for anglewinder drive train systems - mounts with setscrew to 3/32" axle - used to position driven (axle) gear

CNC Machined plastic pulley for 4 wheel drive systems - 2 / package - press fit to 3/32" axle.  

Slot.it SIPA27 CNC Axle Bushings, Double Sided, Bronze x2. CNC Machined bronze double sided axle bushings - for Pro Slot inline or Ninco 4WD Rally...

Slot.it CNC Machined aluminum setscrew pulley for 4 wheel drive systems - 2 / package - use 0.9mm Allen wrench to fit to 3/32" axle.

Slot.it plastic wheel inserts Sauber C9 type - Classic '80s - Group C. For Ø15.8mm wheels (4x).

Slot.it plastic wheel inserts Jaguar XJR9 type  Classic '80s - Group C. For Ø15.8mm wheels (4x).

Pro Axle System Teflon Coated CNC Machined Aluminum Bushings - single wide or 2.38mm (2/32") Axle,  0.18g 55mm length.

Slot.it plastic wheel inserts Lancia LC2-84 type - Classic '80s - Group C. For Ø15.8mm wheels (x4). Fits small hub (SIPA04 / SIPA17 /...

Pro Axle System Independent Rotation Front Axle - Use with SISP17 Eyelets.  Allows the front wheels on your car to rotate independenly for...

Slot.it Wheel Inserts Alfa Romeo T33 (for use with SIPA24/33) x4.

Slot.it Wheel Inserts Alfa Romeo SIPA24/33 wheels, Nylon - 2 fronts, 2 rears. Fits SIPA24/33 size wheels, tires not included.

Slot.it plastic wheel inserts Mazda 787B type - Classic '80s - Group C. For Ø15.8mm wheels ( SIPA17 / SIPA24) x4.  

Slot.it Wheel Inserts for Chaparral 2E.

Slot.it Wheel Inserts Ford GT40 (for PA17/24). Contains original inserts for 15.8mm wheels and (4) 6-spoke inserts, complete set of wing nuts and...

Slot.it plastic wheel inserts Toyota 88C type - Classic '80s - Group C. For Ø15.8mm (x4) and for Ø16.5mm (x2) wheels. Pack...

Set of spacers for hubs and bushings 1.0mm thick (x10).

Slot.it Set of Spacers for Hubs & Bushings 0.6mm thick. Designed to set up axles, especially on anglewinder and sidewinder cars The new, thicker,...