Slot.it SISP43 Digital Chip for Carrera Digital 132

Slot.it SISP43 Digital Chip for Carrera Digital 132

  • Small (25x15 mm) in-car chip for Carrera D132
  • Will convert a regular or high-performance car like Slot.it, Policar, Scalextric, Thunderslot or NSR to work on your Carrera Digital 132 track.
  • Accepts the higher amperage draw of Slot.it and similar cars with these motors.
  • Comes with standard Slot.it connectors and Scalextric socket.  If the car you are converting does not have direct connect terminals they are sold separately (Slot.it part No.SP45).
  • External infrared LED on wires may be used (available separately)

NOTE: The safety car function is not possible with this chip. Ghost function does work.

SP43 ASSEMBLY INSTRUCTIONS
Mounting procedure for any slot car equipped with Slot.it quick-connectors:
1. Loosen chassis screws, take off chassis
2. Connect end A to the front brushes quick-connector
3. Connect end B to the motor quick-connector
4. Proceed to programming according to normal Carrera guidelines

Mounting procedure for any slot car equipped with Scalextric 4-PIN connector (DPR model):
1. Loosen chassis screws, take off chassis
2. Loosen bottom hatch screw, disconnect 4-PIN connector
3. If Slot.it replacement hatch is used, securely fix the chip to it with the 2 clamps. Make sure the infrared LED is visible from the bottom hole
4. Connect the chip with the 4-PIN connector through the dedicated port
5. Proceed to programming according to normal Carrera guidelines

Note: If car has inverted polarity (car runs the wrong way), use inverter cable (CODE: SP46), inserted between chip and motor.

 

$39.99

Add to Cart:
  • Model: SISP43
  • Manufactured by: Slot.it

Ask a Question

Manufacturer Info


Your IP Address is: 34.236.134.129
Copyright © 2024 LEB Hobbies, LLC - Built by PRO-Webs.net