New Products

Sort by:

Displaying 1777 to 1800 (of 5594 Products)

Slot.it SICH119C1 Anglewinder Motor Mount 1.0mm Offset EVO6 Carbon Fiber

Slot.it SICH119C1 Anglewinder Motor Mount 1.0mm Offset EVO6 Carbon Fiber - bearing version. The carbon fiber upgrade for the Slot.it anglewinder...

$17.49

Buy Now

Carrera 30341 Digital 124/132 Track Section for Digital Pit Stop Extension

Item no.: 30341 Carrera Track Section for Digital Pit Stop Extension. This straight is used to extend the Digital 132 Pit Stop Lane. The pit lane can...

$16.99

Buy Now

DS Racing DS-3604 Trigger Rebuild Kit for DS Controllers

DS Racing DS-3604 Trigger Rebuild Kit for DS Controllers. Includes the trigger and trigger bushing, both single (short) and 2 finger (long)...

$16.99

Buy Now

Hudy 103060 3/32" Axle for Hudy 103100 Tire Truer

Hudy 103060 (H3060) 3/32" (2.38mm) Axle for Hudy 103100 Tire Truer. Wheel Axle for Hudy Slot Tire Truer 3.0 mm - 3/32. Fits 3/32” slot car wheels....

$16.99

... more info

Policar P030-10 Contact springs with Fastons (Spade Terminals) for Policar track (10+10)

Policar P030-10 Contact springs (x10) with fastons (x10) for Policar track. Jumper clips for power extensions. Set includes special clips to...

$16.99

Buy Now

Scaleauto SC-0025C Long Can Sprinter Motor 21,500rpm SCX RX41

Scaleauto SC-0025C Long Can Sprinter Motor 21,500rpm SCX RX41. A replacement upgrade motor for SCX cars and SRS2 cars replacing the original RX8,...

$16.99

... more info

Scaleauto SC-0026 Long Can Endurance Motor 22,000rpm

Scaleauto Long-Can Endurance Motor 22,000rpm. Tested at 12V Size: 32 x 20 x 15.3mm 0,20 Amp - 310 gr x cm Sealed endbell 2mm axle Low magnet effect 4...

$16.99

Buy Now

Scaleauto SC-5090B Motor Storage for S-CAN FK-130 Motors - 12 units

Scaleauto SC-5090B Motor Storage for S-CAN FK-130 Motors - 12 units. Measurements: 109x47x45mm Double magnet lid for a perfect closure.

$16.99

Buy Now

Scalextric C8200 Quarter Straight 3.42" (87mm), x2

Item no.: C8200 Scale of track: 1:32 Scalextric Quarter Straight 3.42 inch (87mm), 2/pk. Push-fit Scalextric track for quick and easy circuit...

$16.99

Buy Now

Sideways SWM/BBRAPTOR-P Baby Raptor Motor 17,000 rpm

Racer Sideways Baby Raptor Motor (P) 17,000 rpm with pinion - Special Competition. Long-Can 17,000 rpm, 245g/cm - 12v Fitted with 11 tooth Ø6.5mm...

$16.99

Buy Now

Sideways SWM/JUNIOR Junior Motor 19,500rpm @ 12v 275 g/cm with 11T pinion

Sideways SWM/JUNIOR Junior Motor Special Competition 19,500rpm @ 12v 275 g/cm with 11T pinion.

$16.99

Buy Now

Sideways SWM/RAPTOR Raptor Motor 21,400 rpm

Racer Sideways Raptor Motor 21,400 rpm with pinion and cable - Special Competition. Long-Can 21,400 rpm, 350g/cm - 12v Fitted with 11 tooth...

$16.99

Buy Now

Slot.it SIKK12B Sidewinder Motor Mount Conversion Kit 1.0 Offset

Slot.it Sidewinder motor mount 1.0mm Offset Conversion Kit (replaces SIKK12). This Slot.it motor mount allows easy installation of the S-Can...

$16.99

Buy Now

Slot.it SIKK13B Sidewinder Motor Mount Conversion Kit 0.5 Offset

Slot.it Sidewinder motor mount 0.5mm Offset Conversion Kit. This Slot.it motor mount allows easy installation of the S-Can motors. 34T Ø 18 SW...

$16.99

Buy Now

NSR 2005017 2mm Ultimate Aluminum Rear Wheels Drilled Scale 17" Spanish Rim (x2)

NSR 2005017 2mm Ultimate Aluminum Rear Wheels Drilled Scale 17" Spanish Rim. Larger Ø17 x 10mm. Includes 2 wheels and 2 setscrews.

$16.49

Buy Now

NSR 3015 King Balanced Motor 38,500 rpm 310 g-cm @ 12V

NSR King Balanced Motor 38,500 rpm 310 g-cm @ 12V Long Can - standard 2mm (0.078") shaft. With holes for locking (recommended screw...

$16.49

Buy Now

Policar P002-6 Straight border 179mm, 6/pk

Policar Straight border 7.05" / 179mm, 6/pk. Extra wide borders 6cm (2.36”) wide borders, have the same texture of the track. They clip in place...

$16.49

... more info

Scalextric C8224 R3 Curve Outer Borders 22.5 degrees, x4

Item no.: C8224 Scale: 1:32 Scalextric Radius 3 Curve Outer Borders 22.5º x 4.

$16.49

Buy Now

Scalextric C8238 R4 Curve Outer Borders 22.5 degrees, x4

Item no.: C8238 Scale of track: 1:32 Scalextric Radius 4 Curve Outer Borders 22.5º x 4.

$16.49

Buy Now

Scalextric C8281 R3 Curve Inner Borders 22.5 degrees, x4

Item no.: C8281 Scale of track: 1:32 Scalextric Radius 3 Curve Inner Borders 22.5º x 4.

$16.49

Buy Now

Scalextric C8282 R4 Curve Inner Borders 22.5 degrees, x4

Item no.: C8282 Scale of track: 1:32 Scalextric Radius 4 Curve Inner Borders 22.5º x 4.

$16.49

Buy Now

Carrera 20598 End Pieces for Outside Shoulder (x4)

Item no.: 20598 Carrera End Pieces for Outside Shoulder, x4. Contents: 4 end sections for outer curve borders, 2 right and 2 left These accessories...

$15.99

Buy Now

Carrera 20599 End pieces Inside Shoulder High Banked Curve (x4)

Item no.: 20599 Carrera End pieces Inside Shoulder High Banked Curve, x4. Contents: 4 end sections for inner banked curve borders, 2 right and 2 left...

$15.99

Buy Now