Scaleauto Motors

Scaleauto SC-0008B Short-Can 1/32 Mabuchi Style Moto - 20,000 RPM, 210 gr-cm torque, 210 milliamp max current . Dual shaft allows application in any...

Scaleauto SC-0010B Short Can Tech-3 1/32 Mabuchi style motor - 30,000rpm, 216 gr-cm torque. Dual shaft allows application in any car with standard...

Scaleauto SC-0011C Long-Can Tech-1 Motor 21,300rpm 285 gr-cm torque. 21,300rpm tested at 12V Size: 32 x 20 x 15.3mm 0,18 Amp - 285 gr x cm 2mm...

Scaleauto Long-Can Tech-2 Motor 25,000rpm. Tested at 12V Size: 32 x 20 x 15.3mm 0,26 Amp - 360 gr x cm Sealed endbell 2mm axle Low magnet...

Scaleauto SC-0014B Short-Can Tech-1 Motor - 20,000rpm, 205 gr-cm torque. Same size as JK Falcon, Little Ripper, Cheetah, Fox "S" Can Motors...

Scaleauto SC-0016B Short-Can Tech-3 Motor 30,000rpm, 254 g-cm torque, 370 milliamps max current. 2mm plain motor shaft.

Scaleauto SC-0018B Slim-Can Tech-3 Motor 30,000rpm, 82 g-cm torque, 140 milliamps max current. Tested at 12V Size: 26.9 x 15.5 x 12mm 0,14 Amp...

Scaleauto Long-Can Sprinter-2 Motor 21,500rpm. Tested at 12V Size: 32 x 20 x 15.3mm 0,28 Amp - 300 gr x cm Sealed endbell 2mm axle High magnet effect...

Scaleauto Long-Can Sprinter Motor 21,500rpm for SCX RX41. A replacement upgrade motor for SCX cars and SRS2 cars replacing the original RX8, RX41 and...

Scaleauto Long-Can Endurance Motor 22,000rpm. Tested at 12V Size: 32 x 20 x 15.3mm 0,20 Amp - 310 gr x cm Sealed endbell 2mm axle Low magnet effect 4...

Scaleauto Long-Can Endurance Motor 22,500rpm. Tested at 12V Size: 32 x 20 x 15.3mm 0,20 Amp - 340 gr x cm Sealed endbell 2mm axle magnet effect 4 gr

Scaleauto SC-0027B Long-Can Sprinter-Junior Motor 18,000rpm, 310 gr-cm torque.

Scaleauto Long-Can Sprinter-1 Motor 18,000rpm. Motor SC-28: 18000rpm Sprinter-1 12v - 0,22 Amp. 310 gr* cm 32.1x20.2x15.3mm Sealed endbell High...