Slot.it Axles & Bushings

Slot.it bronze spherical bushings go a step further to reduce friction and increase precision. Self-lubricating bushings will be used on all Slot.it...

Slot.it Axle starter Kit 01B - 28t inline crown, 15.8x8.2mm aluminum wheels, 54mm pro axle, bronze bearings and grub screws. Replaces: KK01 3 grub...

Slot.it Starter Kit 02 - Sidewinder 36t 15.8x8.2mm aluminum wheels. The pack includes: 2 aluminum wheels 15.8x8.2x1.5mm (W15808215A exPA24-Als) 1...

Slot.it Axle Starter Kit Inline 26t 17.3x9.75mm Wheels.  For Carrera Le Mans cars, pre-2004.  Replaces KK03B (2 'BBS' GT inserts...

Slot.it Starter Kit 04 - 36t sidewinder spur gear, 17.3x9.75mm  aluminum wheels, 54mm pro axle, bronze bearings, spacers and grub screws....

Pro Slot Axle sidewinder Starter Kit with "small hub" aluminum wheels, double width bushings, wheel inserts, drill blank axle & 34...

Slot.it Starter Kit Sidewinder 34t 18mm Small Wheels for Proslot

Slot.it Starter Kit 06 - modern F1 inline 24t 14.4x11.5mm aluminum wheels. This kit was developed to be used with Scalextric models reproducing...

Slot.it Starter Kit 07 - 28t inline crown, 17.3x9.75mm aluminum wheels, 54mm pro axle, bronze bearings, spacers and grub screws. Replaces: KK07b 3...

Slot.it Starter Slot Car Axle Kit 08 - 27t inline crown, 15.8x8.2mm plastic wheels, 51mm pro axle, bronze bearings and grub screws. Slot.it. Slot...

Anglewinder Starter Kit 32t with SHORT HUB 17.3 x 9.75mm Aluminum Wheels.  Replaces KK09B. Pack includes: 4 set screws L3mm 1 anglewinder 32t...

Slot.it Starter Kit Anglewinder 32t 17.3x9.75mm Wheels

Slot.it Starter Kit SIKK15B - 36t sidewinder spur gear, 17.3x8.25mm aluminum wheels, 54mm pro axle, bronze bearings, spacers and grub screws. This...

Slot.it Starter Kit for Carrera DTM - 26t inline crown, 17.3 x 8.2 x 1.5mm aluminum wheels, 54mm pro axle, bronze bearings and grub screws. 2...

Slot.it Steel Pro Axle - turned ground, polished, 2.38mm (3/32) x 45mm, 2 pack. ProAxle axles are tempered, rectified steel and give you the...

Slot.it Steel Pro Axle - turned ground, polished, 2.38mm (3/32) x 48mm, 2 pack. ProAxle axles are tempered, rectified steel and give you the...

Slot.it Steel Pro Axle 48mm - polished, 2.38mm (3/32) rectified reduced center diameter for sidewinder, 2 pack. Smaller section near engine No more...

Slot.it Steel Pro Axle - turned ground, polished, 2.38mm (3/32) x 51mm, 2 pack. ProAxle axles are tempered, rectified steel and give you the...

Slot.it Steel Pro Hollow Axle 51mm - turned ground, polished, hollow, 2.38mm (3/32), 2 pack. Hollow shaft to reduce weight and inertia.

Slot.it Steel Pro Axle 51mm - polished, 2.38mm (3/32) rectified reduced center diameter for sidewinder (2x). Smaller section near engine No more dirt...

Slot.it Steel Pro Axle - turned ground, polished, 2.38mm (3/32) x 54mm, 2 pack. ProAxle axles are tempered, rectified steel and give you the...

Slot.it Steel Pro Hollow Axle 54mm - turned ground, polished, hollow, 2.38mm (3/32), 2 pack. Hollow shaft to reduce weight and inertia.

Slot.it Steel Pro Axle 54mm - polished, 2.38mm (3/32) rectified reduced center diameter for sidewinder (2x). Smaller section near engine No more dirt...

Slot.it Bronze Bushings for 3/32 axles, set of 2 pcs.

Bronze bushings for Proslot plastic chassis cars, 3/32 Axles, 2 pack.  

Slot.it Brass Bushings for Carrera and 3/32 axles x2

CNC Machined aluminum collar for anglewinder drive train systems - mounts with setscrew to 3/32" axle - used to position driven (axle) gear

CNC Machined plastic pulley for 4 wheel drive systems - 2 / package - press fit to 3/32" axle.  

Slot.it CNC Machined bronze double sided axle bushings - for Pro Slot inline or Ninco 4WD Rally Cars .

Slot.it CNC Machined aluminum setscrew pulley for 4 wheel drive systems - 2 / package - use 0.9mm Allen wrench to fit to 3/32" axle.

Pro Axle System Teflon Coated CNC Machined Aluminum Bushings - single wide or 2.38mm (2/32") Axle,  0.18g 55mm length.

Pro Axle System Independent Rotation Front Axle - Use with SISP17 Eyelets.  Allows the front wheels on your car to rotate independenly for...

Set of spacers for hubs and bushings 0.10 / 0.25mm thick Designed to set up axles, especially on anglewinder and sidewinder cars Little spacers are...

Set of spacers for hubs and bushings 1.0mm thick (x10).

Slot.it Set of Spacers for Hubs & Bushings 0.6mm thick. Designed to set up axles, especially on anglewinder and sidewinder cars The new, thicker,...

Slot.it CNC Machined aluminum stoppers for anglewinder setup - 2 stoppers / package for 3/32" (2.37mm) axles.