Slot.it Motors & Mounts

Slot.it Motors have three different shapes: traditional 'S' can, longer "Boxer" type, or Slot.it's own 'Flat-6".

'inline' means the motor shaft is perpendicular to the rear axle.  An 'Inline" motor can be either 'endbell inline' or 'can inline' if the pinion is either mounted near the plastic endbell, or on the other end of the motor, the metal can.

'Sidewinder' means that the motor runs parallel to the rear axle, i.e. transversely, and the pinion side discriminates between an 'endbell sidewinder' or a 'can sidewinder' like it does for inline motors.

'Anglewinder' means that the motor shaft is at an angle to the rear axle, similar to the sidewinder positon.

The V12 motors for slot cars, which also fit Carrera cars,  feature a double shaft which makes it a universal motor upgrade for cars of most makers, be it endbell or can inline or sidewinder of both types.

The 'Boxer" type motors for slot cars are an ideal upgrade for the bigger motors found on some vehicles. They can also be used as inline or anglewinder.

The Flat-6 is a revolutionary new concept in slot car racing motors.  It is a custom-built Slot.it motor designed both to be compatible with the exisitng Boxer/NC type motor pods, and to take advantage of a lower center of gravity when used in the special Slot.it motor pods, due to its 'slim' form, that also make it possible using it in an anglewinder configuration under streamlined LMP racers.

The Slot.it motor mounts allow easy installation of short and long can type motors configured as inline, sidewinder and anglewinder.  The 'offset' concept enables upwards displacement of the rear shaft with regards to the bottom plane of the chassis and to the motor drive shaft, thus lowering the stance of the back of the car, to fine tune the ground clearance depending on type of track, wheels, tires and motor, and desired model behavior.  'Offset is the vertical displacememt, in mm, between the center of the rear axle and of the motor shaft.  A further advantage of the 'Offset' principle is that the rear wheel can be properly positioned, vertically inside the wheel arch of the bodywork.

Displaying 1 to 50 (of 53 Products)

Slot.it SICH110 Inline Reverse Motor Mount 0.5mm Offset
Slot.it Inline Reverse Motor Mount 0.5mm Offset. It is in principle exactly like the previous version (SICH70), which it now replaces. The only...

$8.99Buy Now

Slot.it SICH114 Long Inline Motor Mount 0.5mm Offset Boxer/Flat
This motor chassis completes the long inline series. Compatible with DTM frames (side flap removed) by Slot.It. Hard type chassis are suitable for...

$10.49Buy Now

Slot.it SICH115 Sidewinder Motor Mount, EVO6, 1mm Offset
Slot.it Sidewinder Motor Mount 1mm Offset EVO6 with bearing seat (for CH105). This pack includes fins and screws to convert the motor mount into the...

$8.49Buy Now

Slot.it SICH115B SW Motor Mount 1mm Offset EVO6 Bearing Version
Slot.it Sidewinder Motor Mount 1mm Offset EVO6 - bearing version. Replacement or SICH115.

$8.99Buy Now

Slot.it SICH117 Anglewinder Motor Mount 0.0mm Offset EVO6 Hard
Slot.it Anglewinder Motor Mount 0.0mm Offset EVO6 Hard with bearing seat for SICH105. (SICH105 sold separately)

$8.99Buy Now

Slot.it SICH118 Anglewinder Motor Mount 0.5mm Offset EVO6 Hard
Slot.it Anglewinder Motor Mount 0.5mm Offset EVO6 with bearing seat for SICH105. (SICH105 sold separately)

$8.99Buy Now

Slot.it SICH118B Anglewinder Motor Mount 0.5mm Offset EVO6 Hard
Slot.it Anglewinder Motor Mount 0.5mm Offset EVO6 Hard - bearing version. Replacement for SICH118.

$8.99Buy Now

Slot.it SICH119B Anglewinder Motor Mount 1.0mm Offset EVO6 HARD-Bearing Version
Slot.it Anglewinder Motor Mount 1.0mm Offset EVO6 HARD - bearing version. Replacement for SICH119.

$8.99Buy Now

Slot.it SICH13C Inline Reverse Motor Mount 0.0mm Offset
Slot.it Inline Reverse Motor Mount 0.0mm offset. Replaces CH13b - difference from replaced item: tab removed (compatible with classic DTM chassis).

$8.99Buy Now

Slot.it SICH47B HRS Universal Spring Suspension Kit
Slot.it Universal Spring Suspension Kit with Soft Springs for use with all Slot.it motor mounts. Components for standard CH47 spring suspension....

$8.99Buy Now

Slot.it SICH47C Universal Spring Suspension Kit Rev.1
Slot.it universal spring suspension kit (rev1). Soft springs - for all type of motor mounts.

$11.99Buy Now

Slot.it SICH48B HRS2 Motor Mount, Inline, 0.0mm Offset, Box/Flat
Slot.it Inline Long Motor Mount 0.0mm offset Boxer/Flat - Hard.  Compatible with DTM frames (side flap removed) of Slot.it. This Slot.it...

$10.49Buy Now

Slot.it SICH49B HRS2 Motor Mount Inline 1.0mm Offset Boxer/Flat
Slot.it HRS Chassis Offset 1mm lowered long lnline motor mounting pod for Boxer or Flat 6 motors.  Includes reinforcing metal brace and 2x M2...

$10.49Buy Now

Slot.it SICH55A Soft Springs for CH47B Suspension x8
Slot.it Soft Springs for CH47B Suspension x8.

$5.49Buy Now

Slot.it SICH55B Medium Springs for CH47B Suspension x8
Slot.it Medium Springs for CH47B Suspension x8.

$5.49Buy Now

Slot.it SICH55C Ultra Soft Springs for SICH47B suspension
Slot.it Ultra Soft Springs for SICH47B suspension. Spare springs for CH47b suspension kit. These new springs have the same diameter, wire dimensions...

$5.49Buy Now

Slot.it SICH60B AW Motor Mount Hard Offset 0.5mm for Boxer/Flat
Slot.it Anglewinder Motor Mount 0.5mm Offset EVO6 Hard. This Slot.it motor mount allows easy installation of the Boxer / Flat-6 motors....

$8.99Buy Now

Slot.it SICH60B1 Anglewinder motor mount 0.5mm offset EVO6 Hard
Slot.it Anglewinder motor mount 0.5mm offset EVO6 Hard. Replacement for SICH60B.

$8.99Buy Now

Slot.it SICH61 AW EVO6 Motor Mount for Boxer/Flat 0.0mm Offset
EVO6 Anglewinder motor mount for Boxer / Flat-6 0.0mm Offset (replaces CH29)

$8.99Buy Now

Slot.it SICH65 Sidewinder Motor Mount 1.0mm Offset EVO6
Slot.it Sidewinder Motor Mount 1.0mm Offset EVO6. The pack includes fins and screws to convert motor mount into the EVO6 version.  New engine...

$8.99Buy Now

Slot.it SICH67 HRS Sidewinder Motor Mount, 0.5mm Offset, Evo6
Slot.it HRS, EVO6 Motor Mount for V12 Motor & 18mm spur gear Offset 0.5mm (Replaces CH62). This Slot.it motor mount allows easy installation of...

$8.99Buy Now

Slot.it SICH68 Sidewinder Motor Mount 0.75mm Offset
Slot.it Sidewinder Motor Mount 0.75mm Offset. New motor mount with 0.75 mm offset. Color: ivory white. Compatible with EVO6 version. Uses new style...

$8.99Buy Now

Slot.it SICH69 Sidewinder Motor Mount 0.75mm Offset Evo 6
Slot.it Sidewinder Motor Mount 0.75mm Offset Evo 6.  Motor mount with 0.75 mm offset, new engine orientation for a better magnetic traction. The...

$8.99Buy Now

Slot.it SICH72 Motor Mount, Plastic Retainer Nuts, 6/pk
These plastic retainer nuts allow you to use body-to-chassis screws to allow proper movement of the motor mount.

$4.99Buy Now

Slot.it SICH74 Anglewinder Motor Mount LMP 1.0mm Offset
Slot.it Anglewinder Motor Mount 1.0mm Offset for Boxer/Flat6.   Stock motor mount for GT & LMP cars. Same as the stock part supplied on...

$8.99Buy Now

Slot.it SICH75 Anglewinder Motor Mount LMP 0.5mm Offset
Slot.it Anglewinder Motor Mount LMP 0.5mm Offset Boxer/Flat EVO 6. Softer material compared with the CH60 (nylon and 30% fiberglass) 6 screws 3rd...

$8.99Buy Now

Slot.it SICH76 Anglewinder Motor Mount LMP 0.0mm Offset
Slot.it Anglewinder Motor Mount LMP 0.0mm Offset Boxer/Flat EVO 6. Softer material compared with the CH61 (nylon and 30% fiberglass) 6 screws 3rd...

$8.99Buy Now

Slot.it SICH82 Anglewinder Motor Mount 1.0mm Offset EV06 Hard
Slot.it anglewinder Evo6 motor mount 1.0mm offset to fit Boxer/Flat6  motors. Hard type motor mount suitable for high torque motors to avoid the...

$8.99Buy Now

Slot.it SICH82B Anglewinder Motor Mount 1.0mm Offset EVO6 Hard
Slot.it Anglewinder Motor Mount 1.0mm Offset EVO6 Hard. Replacement for SICH82.

$8.99Buy Now

Slot.it SIKK10B AW Motor Mount Conversion Kit 1.0mm Offset
Slot.it anglewinder motor mount 1.0mm offset EVO6 conversion kit.  Replaces SIKK10 - 4 holes motor mount replaced with 6 holes version This pack...

$17.99Buy Now

Slot.it SIKK10C Anglewinder Motor Mount Conversion Kit 1.0mm Offset
Slot.it Anglewinder Motor Mount Conversion Kit 1.0mm Offset.

$17.99Buy Now

Slot.it SIKK11 Anglewinder Motor Mount Conversion Kit 0.0 offset
Slot.it Anglewinder motor mount 0.0mm offset Conversion kit.  With 30t SW crown + 11t 6.5mm pinion, axle stopper and motor screws.  For HRS...

$17.99Buy Now

Slot.it SIKK12B Sidewinder Motor Mount Conversion Kit 1.0 Offset
Slot.it Sidewinder motor mount 1.0mm Offset Conversion Kit (replaces SIKK12). This Slot.it motor mount allows easy installation of the S-Can...

$15.99Buy Now

Slot.it SIKK13B Sidewinder Motor Mount Conversion Kit 0.5 Offset
Slot.it Sidewinder motor mount 0.5mm Offset Conversion Kit. This Slot.it motor mount allows easy installation of the S-Can motors.  34T Ø...

$15.99Buy Now

Slot.it SIKK14C AW Motor Mount Flat6 Conversion Kit 1.0mm Offset
Slot.it anglewindernmotor mount 1.0mm offset Flat-6 EVO6 conversion kit.  4 holes motor mount replaced with 6 holes version This pack includes:...

$15.99Buy Now

Slot.it SIKK14D AW Motor Mount Flat6 Conversion Kit 1.0mm Offset
Slot.it Anglewinder Motor Mount Flat6 Conversion Kit 1.0mm Offset. Replaces SIKK14C.

$16.99Buy Now

Slot.it SIKK16 AW Motor Mount PCR Conversion Kit 1.0mm Offset
Slot.it anglewinder motor mount 1.0mm offset Scalextric PCR EVO6 conversion kit. This Slot.it motor mount allows easy installation of the Flat-6...

$15.99Buy Now

Slot.it SIKK16B AW Motor Mount PCR Conversion Kit 1.0mm Offset
Slot.it Anglewinder Motor Mount PCR Conversion Kit 1.0mm Offset. Replaces SIKK16.

$16.99Buy Now

Slot.it SIMN08CH Boxer/2 Motor 21,500 rpm Open/Closed
Slot.it Boxer/2 Motor 21,500 rpm Open/Closed. The Slot.it Boxer/2 motor has two different case sides, open and close, merging the 'open' and...

$17.99Buy Now

Slot.it SIMN09C Flat-6 Motor 20.5k rpm Closed Can 200gm/cm
Low Profile Boxer FLAT-6 Motor - 20,500 RPM, 200 gm-cm torque with no pinion - 7.3mm Front Shaft Length - Closed Can - Compatible with home racing...

$21.99Buy Now

Slot.it SIMN09CH Flat6 20.5k Motor Open and Close, 200gm/cm
LOW PROFILE Boxer FLAT-6 motor - 20,500 RPM, 200 gm-cm torque with no pinion - 10 grams magnetic traction - Compatible with home racing wall pack...

$21.99Buy Now

Slot.it SIMN11H-2 Flat-6R 22k rpm motor Low Profile 220gm/cm
LOW PROFILE Boxer FLAT-6R motor - 7.3mm Front Shaft Length - 22,000 RPM, 220 gm-cm torque with no pinion - 22 grams magnetic traction - Compatible...

$21.99Buy Now

Slot.it SIMN13CH Flat-6 S 22.5k rpm Inline Open Case 230g*cm
Slot.it has further improved the revolutionary concept of the Flat-6 motor.  Two new versions are now available of this compact and lightweight...

$19.99Buy Now

Slot.it SIMN14H Flat-6 RS 25K 240g*cm Different Opening Case
Slot.it has further improved the revolutionary concept of the Flat-6 motor.  Two new versions are now available of this compact and lightweight...

$19.99Buy Now

Slot.it SIMX15 V12/4 21k rpm motor 150g*cm No Pinion
Slot.it S-Can Motor 21,000 rpm V12/4 - Classic DTM Slot.it models box stock.  Supplied without wires and pinion. Stall torque:  150 g*cm...

$17.99Buy Now

Slot.it SIMX16 V12/4 23K rpm motor Inline 170 g*cm No Pinion
Slot.it small can motor 23,000 rpm V12/4, 170 g*cm @ 12v. Supplied without wires and pinion. This Slot.it V12/4 motor 23,000rpm (SIMX16) is assembled...

$17.99Buy Now

Slot.it SIMX16-M V12/4 23K rpm motor 170 g*cm Single Shaft
Slot.it V12/4 Motor 23.000 rpm with single-shaft. Stall torque: 170 g*cm Maximum speed: 23000 rpm Maximum power: 9.8 W @ 12 V Supplied without wires...

$17.99Buy Now

Slot.it SIMX17 V12/4 29k rpm motor Inline/Sidewinder, No Pinion
Slot.it S-Can motor, 29,000 rpm V12/4 (FC130) - 160 g*cm torque, supplied without wires and pinion.  Compatible with home racing wall pack power...

$17.99Buy Now

Slot.it SISP04 Motor Lead Wire Brass Eyelets x10
Brass eyelets install on end of motor lead wires - they are then inserted into a Slot.It guide flag where a friction fit holds them (and the wire...

$3.99Buy Now

Slot.it SISP08 Motor Adapter V12 to RX Shape Motor
Slot.it Motor Adapter for use with Mabuchi style motors such as Slot.it V12, Scale Auto SC007 SC009, SC010 and similar Mabuchi style motors - to...

$4.49Buy Now
Displaying 1 to 50 (of 53 Products)

Your IP Address is: 44.210.77.73
Copyright © 2024 LEB Hobbies, LLC - Built by PRO-Webs.net